AI-Powered Network Troubleshooting Tools for Faster Fixes
At 9:12, a branch office joins its first big call of the day. People working from home can hear one another clearly. Every time someone in the branch speaks, a few words go missing. The router answers a ping, the voice provider’s status page is green, and somebody is already asking whether to reboot the Wi-Fi.
Before anyone touches the router, I’d want to know what the people cutting out have in common. Are they on the same access point? Does it happen to people plugged in at their desks, too? A troubleshooting tool can help line up the call reports with network paths and measurements, so you can start with the minute the audio broke up.
Table of Contents
- What the tool sees during an outage
- Which tool fits the problem
- Try the tool on a recurring problem
- Start with the path your users take
- Put the likely cause to the test
- Check the fix during the next busy spell
What the tool sees during an outage
Different measurements answer different questions. A router’s interface counters can show when it starts dropping packets. Flow records tell you which addresses exchanged traffic and how much data moved. A scheduled synthetic test sends traffic from a known location to a target at regular intervals. Run it from an office and a cloud region, and you can see how the same service behaves from both places.
A link that gets busy every morning may be doing exactly what you expect. If the link gets busy and calls across it start losing packets at the same time, you’ve got something to investigate. Some tools learn typical error rates from past test results and flag unusual changes. They can also look for a connection between failures. Several failing tests might all pass through the same proxy, for example.
That shared proxy gives you a lead. Compare the failing requests with requests that reach the same service through a different path. If only the traffic through the proxy is slow, pass along both sets of results and the proxy address. Its owner can check the logs for the exact time the requests slowed down.
Which tool fits the problem
Cisco ThousandEyes is worth a look when the trouble could be anywhere between your office and an external service. Say a supplier portal times out from two branches. You can run tests toward the same destination from office and cloud agents, then compare routes, latency, and packet loss. Its Event Detection feature looks for related failures across tests to narrow down where the problem might be. If the affected branches share a provider, check whether other destinations they reach through that provider are slow in the same window.
HPE Marvis fits a different kind of ticket. Imagine laptops that join the office Wi-Fi and then sit there with no usable connection. On a Juniper Mist network, the client timeline can show when a device tries to get an IP address through DHCP. Marvis Actions can flag DHCP or authentication failures with the relevant subscription. If the failures cluster on one network segment, check whether the DHCP pool has spare addresses and whether requests from that segment are reaching the server.
Kentik makes sense when you already collect flow data and want to understand what changed in your traffic. Say transfers out of a cloud region suddenly double. With Cause Analysis enabled, Kentik can identify the jump, compare traffic before and after it, and surface the destinations or applications that account for much of the change. You can then check whether the largest contributor lines up with a deployment or a scheduled transfer.
Try the tool on a recurring problem
A trial should tell you whether your team can build a useful timeline with the data it collects. Pick a problem that comes up often enough to catch again. If remote staff report slow access to an internal app on Monday mornings, run a test from a device using the VPN and another from inside the office. Check that the first probe actually sends its traffic through the tunnel, then compare results for the same application in the same time window.
Pay attention to the sampling interval. A check that runs every five minutes can miss a thirty-second stall. If that’s the kind of ticket your team gets, see whether the tool can run a more frequent check or use measurements from real sessions. Also check how far you can drill into an alert. A timestamp, test location, and original measurement let the on-call engineer compare the alert with what the user reported.
One trial measure I like is how long it takes an engineer to go from the first report to a cause they can test. Include the time it takes to get the right agent in place or find the relevant interface. Then hand the alert to someone who missed the demo and see how easily they can get to the same evidence.
Start with the path your users take
Back at the branch, start with the call where the audio cut out. Get the time of the complaint, the affected devices, and the call statistics if you have them. A support ticket filed at 9:25 can describe a problem that started thirteen minutes earlier. That matters when you’re lining up a call report with interface graphs.
When both wired and wireless callers have the same trouble, trace the part of the route they share. In this case, they all leave through the branch’s internet uplink. If your call report breaks down packet loss by participant and direction, compare the audio sent by the branch with audio sent by remote callers in that same call. Then check a test from inside the branch toward the service. That test includes the link your users depend on.
Read the whole path when you look at a trace. An intermediate router can skip replying to a probe and continue forwarding traffic. If a hop goes quiet, look at the measurements to the destination and see whether other tests using that path report the same trouble.
Put the likely cause to the test
Suppose the call statistics show loss on the audio coming out of the branch. The router’s outbound queue also starts dropping packets at 9:12. Flow data shows one file server sending a lot more traffic than usual. A quick look at the job history shows that its daily replication started a few seconds before the drops.
Now check which queue is dropping packets and whether the router puts call traffic in that queue. While the problem is happening, slow the replication job if you can. Watch the queue’s drop rate and the call metrics together. If the drops stop and the audio clears, you have a result you can try to reproduce.
Sometimes the timing will send you back a step. If the queue was already dropping packets before the transfer started, widen the window and look at which flows grew first. I’d take five minutes to check that sequence before moving a daily job around. If you’re looking at a cumulative counter, check how quickly it rose during the affected minutes. A large total could reflect days of activity.
Check the fix during the next busy spell
If you cap the replication job to give calls room on the uplink, watch the next scheduled run. Get someone in the branch to make a call, check the same outbound queue, and look at audio loss during the transfer. Make sure the replication still finishes on schedule. You’ve got two jobs to get through the same link.
Save the site and interface in the incident note, along with the time the drops started and the name of the replication job. Include a graph from the successful run so the team can see what recovery looked like under load. If the audio starts breaking up again next Tuesday, whoever is on call can pull up those same measurements while the calls are still going.
